Products
-
RM-X52 Frame Set
HK$2,600.00
-
MX-64 Gear/Bearing Set
HK$500.00
-
Jaguar V4
HK$133,800.00
-
ROBOTIS Mini
HK$4,600.00
-
Li-ion Battery 3.7V 1300mAh LB-041
HK$250.00
-
U2D2 Power Hub Board
HK$250.00
-
PH42-020-S300-R
HK$13,200.00
-
temi
HK$80,000.00
CM-530
CM-530 ** DESCRIPTION – CM-530 is a controller that includes a CPU,TTL communication board, status LED, input button, GP I/O port. – Compatible with the AX and MX series – Supports Bluetooth and Zigbee communication – Connects via PC and USB comm. ** INCLUDES Description Qty Controller CM-530 1 Downloader Mini USB Cable 1...
CM-550
Features CM-550 is a controller that includes a MCU, DYNAMIXEL TTL Comunication board, BLE Slave communication module, Gyro Accelerometer, Temperature sensor, Buzzer, RGB LED, Sensor ports, MIC, etc. BLE slave module is included. With Micro USB Port, it can connect via PC and USB comm. Package Components CM-550 1 Micro USB...
Li-ion Battery 3.7V 1300mAh LB-041
Features Lithium-ion rechargeable battery. PCM is incorporated to protect the battery from overcharge, discharge, and excessive current. Battery cover (blue) included for safety. Package Components Li-ion battery 3.7V 1300mAh LB-041 1 * Battery charger (LBB-041) sold separately H/W Specifications Weight 50g Size 24mm x 70mm x 27mm Voltage 3.7V Capacity...
Li-ion Battery Charger Set LBB-041
Features – This charger is intended for the ROBOTIS Li-ion Battery 3.7V 1300mAh LB-041 rechargeable battery. – Uses 6mm rivets (ROBOTIS DREAM/MINI) to install onto robots. – Can be used as a frame to attach the battery onto robots. – Charging : RED LED, Charging complete : LED OFF –...
LIPO Battery 11.1V 1000mAh LB-010
Features This LiPo battery is intended for robots. PCM is incorporated to protect the battery from overcharge, discharge, and excessive current. Can be recharged with LBC-010 Battery Charger. Package Components LIPO 11.1V Battery LB-010 1 Battery Cover-T 1 FP04-F60 1 Battery Extension Cable 1 * Battery Charger (LBC-010) sold separately...
LIPO Battery 11.1V 1300mAh LB-020
Features This LiPo battery is intended for Engineer Kits. PCM is incorporated to protect the battery from overcharge, discharge, and excessive current. Can be recharged with LBC-010 Battery Charger. Package Components LIPO Battery 11.1V 1300mAh LB-020 1 EF25-F27 1 EF25-F26 1 Battery Extension Cable 1 *Battery Charger sold separately H/W...
LIPO Battery 11.1V 1800mAh LB-012
Features PCM is incorporated to protect the battery from overcharge, discharge, and excessive current. Lithium Polymer rechargeable battery for the ROBOTIS OP series. Cannot be used for PREMIUM/GP because the connector and size differs. Can be recharged with LBC-010 Battery Charger. Package Components LIPO 11.1V 1800mAh LB-012 1 * Battery...
LIPO Battery Charger LBC-010
Features – This charger is intended for the Li-Po battery. – Uses the SMPS for power when charging, thus it must be accompanied with the SMPS 12V 5A. – Support 2S and 3S Cell charge. (Exception, does not charge simultaneously) Package Components LIPO Battery Charger LBC-010 1 * Battery and...
OpenCM9.04-C
[902-0084-040] OpenCM9.04-C ■ Description OpenCM9.04 is an open-source controller that runs under 32bit ARM Cortex-M3. All hardware and software are disclosed. Uses an exclusive 3PIN connector to control the ROBOTIS DYNAMIXEL XL-320. Uses USB Cable (Micro-B) to download programs onto the board. Users can choose between using the ROBOTIS RoboPlus...
OpenCR1.0
[903-0257-000] OpenCR1.0 ■ Basic Features OpenCR1.0 (Open-source Control module for ROS) is an open source robot controller embedded with a powerful MCU from the ARM Cortex-M7 line-up. The hardware, software, schematics, PCB Gerber, BOM, and firmware source codes of the OpenCR1.0, the main controller used in the official ROS education platform...
SMPS 12V 5A PS-10 [INTL]
Features Power supply and battery charging device. Used to power the robot or charger. Package Components SMPS 12V 5A PS-10 1 AC Cord 1 H/W Specifications Output 12V 5A Supply Voltage 100 ~ 260V AC (Free Voltage) Jack Size 5.5mm (External diameter) x 2.5mm (Internal diameter) Compatible Products Controller :...
U2D2
[902-0132-000] U2D2 ■ Basic Features U2D2 is a small size USB communication converter that enables to control and to operate the DYNAMIXEL with the PC. It is smaller than the previous model and has mount holes to make it easier to install on robots. It uses the USB cable to connect to...